• Мы настраиваем процесс для вас.

    Вы получаете полностью запротоколированный процесс для каждого галтовочного станка.

Wet Grinding Paste

Used in particular in conjunction with porcelain polishing media. Increases the grinding effect during wet grinding and is also suitable for roughening blunt grinding tools.

Type Grinding performance

low->high

Surface

smooth->high gloss

Applications Properties
SP 62 ++++++ ++ Metals Used in combination with porcelain polishing bodies

 

 

Dry Grinding Paste

These dry grinding pastes are mainly used together with H2/... and M2/...granulates in the dry grinding process. However, stock removal rates are considerably lower than with wet grinding mediia. The dry grinding media are mainly used for deburring workpieces with a minor amount of burring or for smoothing after wet grinding in order to prevent the orange peel effect.

Type Grinding performance

low->high

Surface

smooth->high gloss

Applications Properties
SP 15 ++++++ +++ Steel Removing small burrs, smoothing after wet grindingt
SP 26 ++++ ++++ Non-ferrous metals Removing small burrs, smoothing after wet grinding

 

 

Dry Polishing Paste

These polishing pastes are mainly used in conjunction with H1/.. and M1/.. granulates in the dry finishing process. They give high-quality surfaces. Since they mostly contain oil, they also give good protection against corrosion.  

Type Smoothing

low->high

Surface

smooth->high gloss

Applications Properties
P 1 ++++++ +++++++ Precious metals, brass  
P 2 +++++ +++++++ Gold, brass Very liquid
P 6 +++++ +++++++ Precious metals Odourless
P 10 +++++ +++++++ Silver  
P 16 +++++ +++++ Steel alloys Suitable for the pharmaceutical industry
P 28 +++++++ +++++ Steel alloy, titanium Good corrosion protection

 

 

 

Polishing POWDER

These polishing powders are used mainly with H1/.. and M1/..granulates in dry finishing processest. They give high-quality, smooth, mirror-finish surfaces. Polishing powders are always used together with adhesive oils or adhesive greases, e.g. HL9 or HL7, since this is the only way to ensure that the powder adheres sufficiently to the polishing granules.  

Type Polishing performance

low->high

Surface

smooth->high gloss

Applications Properties
M 10 ++++ +++++++ Precious metals, brass  
M 18 +++++++ ++++++ Steel titanium Polishing steel parts, e.g. tool holders
M 21 ++++++ +++++++ Non-ferrous metals Fine polish
PP 01 +++++++ +++++ Ceramic, hard metals  
PP 02 +++++ ++++++ Ceramic, hard metals, CoCr Polishing implants
PP 04 ++++ +++++++ Ceramic, hard metals, CoCr Polishing implants

 

 

Grinding Oil

Used together wih H/.. and M/.. granulates and polishing powders. The grinding oil creates a bond between the substrate and the polishing powder. The grinding oils are also suitable for regreasing dried-out granulate and for binding dust, e.g. when using  HSC granulates.  

HL10:  Biological grinding oil
HL11:  Mineral grinding oil

Необязательный запрос на контакт