Wet Grinding Paste
Used in particular in conjunction with porcelain polishing media. Increases the grinding effect during wet grinding and is also suitable for roughening blunt grinding tools.
| Type |
Grinding performance low->high |
Surface smooth->high gloss |
Applications | Properties |
|---|---|---|---|---|
| SP 62 | ++++++ | ++ | Metals | Used in combination with porcelain polishing bodies |
Dry Grinding Paste
These dry grinding pastes are mainly used together with H2/... and M2/...granulates in the dry grinding process. However, stock removal rates are considerably lower than with wet grinding mediia. The dry grinding media are mainly used for deburring workpieces with a minor amount of burring or for smoothing after wet grinding in order to prevent the orange peel effect.
| Type |
Grinding performance low->high |
Surface smooth->high gloss |
Applications | Properties |
|---|---|---|---|---|
| SP 15 | ++++++ | +++ | Steel | Removing small burrs, smoothing after wet grinding |
| SP 26 | ++++ | ++++ | Non-ferrous metals | Removing small burrs, smoothing after wet grinding |
Dry Polishing Paste
These polishing pastes are mainly used in conjunction with H1/.. and M1/.. granulates in the dry finishing process. They give high-quality surfaces. Since they mostly contain oil, they also give good protection against corrosion.
| Type |
Smoothing low->high |
Surface smooth->high gloss |
Applications | Properties |
|---|---|---|---|---|
| P 1 | ++++++ | +++++++ | Precious metals, brass | |
| P 2 | +++++ | +++++++ | Gold, brass | Very liquid |
| P 6 | +++++ | +++++++ | Precious metals | Odourless |
| P 10 | +++++ | +++++++ | Silver | |
| P 16 | +++++ | +++++ | Steel alloys | Suitable for the pharmaceutical industry |
| P 28 | +++++++ | +++++ | Steel alloy, titanium | Good corrosion protection |
Polishing POWDER
These polishing powders are used mainly with H1/.. and M1/..granulates in dry finishing processest. They give high-quality, smooth, mirror-finish surfaces. Polishing powders are always used together with adhesive oils or adhesive greases, e.g. HL9 or HL7, since this is the only way to ensure that the powder adheres sufficiently to the polishing granules.
| Type |
Polishing performance low->high |
Surface smooth->high gloss |
Applications | Properties |
|---|---|---|---|---|
| M 10 | ++++ | +++++++ | Precious metals, brass | |
| M 18 | +++++++ | ++++++ | Steel titanium | Polishing steel parts, e.g. tool holders |
| M 21 | ++++++ | +++++++ | Non-ferrous metals | Fine polish |
| PP 01 | +++++++ | +++++ | Ceramic, hard metals | |
| PP 02 | +++++ | ++++++ | Ceramic, hard metals, CoCr | Polishing implants |
| PP 04 | ++++ | +++++++ | Ceramic, hard metals, CoCr | Polishing implants |
Grinding Oil
Used together wih H/.. and M/.. granulates and polishing powders. The grinding oil creates a bond between the substrate and the polishing powder. The grinding oils are also suitable for regreasing dried-out granulate and for binding dust, e.g. when using HSC granulates.
HL10: Biological grinding oil
HL11: Mineral grinding oil
